Luvocom 3F PEEK 9581 (Polyether Ether Ketone) is a high-performance 3D printer filament. The material is used in various industries, ranging from aerospace, marine, and automotive to medical, oil & gas and energy. It is often used to replace metal and composite parts.
Parts printed with the material are suitable for use in applications that will be exposed to short term service temperatures of up to 260°C and continuous service temperatures up to 250°C. The 3D printed parts have excellent layer bonding, resulting in an unsurpassed dimensional accuracy and z-strength.
Key features
- Lehvoss Luvocom 3F PEEK 9581 inside
- Suitable for applications with a continuous service temperature of 250°C.
- Short term service temperature of 260°C (during lifetime max. 200h)
- Heat deflection temperature of 145°C
- High Z-strength
- Excellent mechanical properties
- Flame resistance properties according to UL 94 V-0
- Exceptional chemical resistance properties
Applications
- Dynamically-stressed parts
- Highly chemically-resistant parts
- Aerospace applications
- Automotive
The PAEK family
PolyArylEtherKetone (PAEK) is a family of semi-crystalline high performance thermoplastics that are characterized by high mechanical strength and excellent resistance to temperature, chemicals and wear.
The most widely used members of the PAEK thermoplastic family are:
- PolyEtherEtherKetone (PEEK)
- PolyEtherKetoneKetone (PEKK)
- PolyEtherKetone (PEK)
- PolyEtherKetoneEtherKetoneKetone (PEKEKK)
- PolyEtherEtherKetoneKetone (PEEKK)
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.10mm | Experience level: Expert |
| Print temp: ± 370 – 420° C | Fan speed: 0 – 25% | Drying: +4 hours at max.110°C |
| Heat bed: ≥ 120° C | Enclosure needed: 90°C heated chamber | Adhesion: EasyFix Nr. VII |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.31 g/cc | 0.2 Kg spool | 0.5 Kg spool | | | |
| Ø 1.75mm | ± 63m | ± 159m | | | |
| Ø 2.85mm | ± 24m | ± 60m | | | |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
