Zum Inhalt springen
pliedes.com
  • Home
  • Shop
  • 3D-Druck-Service
  • Kontakt
  • 0
  • 0
  • English (UK) Deutsch
  • Anmelden
  • Kontaktieren Sie uns
pliedes.com
  • 0
  • 0
    • Home
    • Shop
    • 3D-Druck-Service
    • Kontakt
  • English (UK) Deutsch
  • Anmelden
  • Kontaktieren Sie uns
  1. Alle Produkte
  2. Verbrauchsmaterial
  3. Castable LCD Resin - Castable Wax
  4. Verbrauchsmaterial
Preisliste: The Girl in the White Shirt Preisliste
The Girl in the White Shirt
Preisliste: The Girl in the White Shirt Preisliste
The Girl in the White Shirt
Castable LCD Resin - Castable Wax

Castable LCD Resin - Castable Wax

(0 Rezension)

Castable Wax Resin ist ein hochpräzises Gießharz auf Wachsbasis für den 3D-Druck von Direktfeingussteilen für Dental-, Schmuck- und Industrieanwendungen.

79,33 € 79,33 € (inkl. Steuern)
66,11 € (inkl. Steuern)

  • Marke
  • Farbe
  • Gewicht
In den Warenkorb
Jetzt kaufen
Auf die Wunschliste
Allgemeine Geschäftsbedingungen
30-Tage-Geld-zurück-Garantie
Versand: 2-3 Geschäftstage

Qualität


  • Produktbeschreibung
  • Datenblätter

Our Castable Wax Resin is a highly accurate blue wax-based casting resin. It is designed to be used for direct investment casting parts for dental, jewellery and industrial applications. The wax component in this 3D printing resin offers a clean ash-free burnout. Furthermore it has an extremely low expansion factor. This ensures the wax filler to melt and shrink away from the mould without expanding, and by that protecting fragile investment moulds.

This wax-based castable 3D printing resin has an exceptionally low shrinkage factor. You’re also able to print parts with smooth surfaces and incredibly fine detail. The Castable LCD Resin – Castable Wax has been tested extensively and validated by both dental technicians and jewellers.

Key Features:

  • Ash-free burnout
  • Low expansion factor
  • High dimensional accuracy with low shrinkage factor
  • Smooth services with incredibly fine detail
  • Almost odorless processing
  • Compatible with all open-source SLA, DLP, and LCD 3D printers in the range of 385 – 405nm

 

Applications:

  • Dental molds
  • Jewelry molds
  • Industrial molds

Preparation(s) before starting to print

  • Make sure that the resin is at room temperature (22°C +/- 1°C) before use
  • The wax component in the resin makes the resin more viscous at lower temperatures.
  • Below 16°C the resin solidifies too much and gets too viscous for good 3D printing results
  • Shake the bottle for at least 2 minutes before each use.
  • After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
  • The resin can be poured back from the vat into the bottle once your print is finished
  • Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Print Settings:

Anycubic Photon

25µm

First / Burn-in Layers: 6x 80 to 85 Seconds

Normal Layers: 10 to 11 Seconds

Lifting Distance: 10mm

Lifting Speed: 45 mm/s

Light-off Delay: 3

Bottom Light-off Delay: 3

Anycubic Photon Mono X

50µm

First / Burn-in Layers: 4x 55 to 60 Seconds

Normal Layers: 3.0 to 3.5 Seconds

First Layer Lifting Distance: 6mm

Lifting Distance: 6mm

Lifting Speed: 90 mm/m

Light-off Delay: 3.0s

Bottom Light-off Delay: 3.0s

UV Power: 55 – 60 %

100µm

First / Burn-in Layers: 4x 55 to 60 Seconds

Normal Layers: 3.0 to 3.5 Seconds

First Layer Lifting Distance: 6mm

Lifting Distance: 6mm

Lifting Speed: 90 mm/m

Light-off Delay: 3.0s

Bottom Light-off Delay: 3.0s

UV Power: 55 – 60 %

Elegoo Mars 2 Pro

50µm

First / Burn-in Layers: 4x 120 to 130 Seconds

Normal Layers: 2 to 3 Seconds

Lifting Distance: 10mm

Lifting Speed: 45 mm/s

Light-off Delay: 5

Bottom Light-off Delay: 5

Elegoo Mars 3

25µm

First / Burn-in / Bottom Layers: 2x to 3x for 33 to 35 Seconds

Exposure Time Normal Layers: 3.5 to 3.6 Seconds

Lifting Distance: 6+2mm

Bottom Lifting Distance:6+2mm

Lifting Speed:60mm/min & 60mm/min

Retraction Speed:240mm/min & 0mm/min

Rest Time Before Lift: 0.5 Seconds

Rest Time After Retract: 2.0 Seconds

50µm

First / Burn-in / Bottom Layers: 2x to 3x for 33 to 35 Seconds

Exposure Time Normal Layers: 4 to 4.2 Seconds

Lifting Distance: 6+2mm

Bottom Lifting Distance:6+2mm

Lifting Speed:60mm/min & 60mm/min

Retraction Speed:240mm/min & 0mm/min

Rest Time Before Lift: 0.5 Seconds

Rest Time After Retract: 2.0 Seconds

Elegoo Saturn

50µm

First / Burn-in / Bottom Layers: 2x to 3x for 25 to 35 Seconds

Exposure Time Normal Layers: 4.5 to 5.0 Seconds

Lifting Distance: 6mm

Bottom Lifting Distance:6mm

Lifting Speed:60mm/min & 120mm/min

Rest Time Before Lift 2.0 Seconds

Rest Time After Retract: 1.0 Seconds

 

Post-Processing:

    • We do advise you to post-process your 3D print in order to achieve the material properties
    • Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
    • An ultrasonic cleaner is preferred/recommended
    • Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
    • Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
    • Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
    • The preferred curing wavelength is between 300-410nm

 

Safety:

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

    • Always wear Respiratory Protection when sanding/cutting the resin object.
    • Always use nitrile gloves when handling resins and uncured resin objects.

 

Sicherheitsdatenblatt


Beginnen Sie beim Kunden – finden Sie heraus, was er möchte und bieten Sie dies an.

Ihr dynamisches Snippet wird hier angezeigt ... Diese Meldung wird angezeigt, weil Sie weder einen Filter noch eine Vorlage zur Verwendung bereitgestellt haben.

Spezifikationen

Filament
Farbe blau
Gewicht 500g
Andere
Marke Formfutura

Kundenrezensionen

​
Entdecken
  • Home
  • Datenschutzerklärung
  •  Impressum
  • Allgemeine Geschäftsbedingungen
  • Rückgabebedingungen
Dienstleistungen
  • Marketplace

Folgen Sie uns
  • Facebook
  • Linkedin
  • Instagram

Kontakt aufnehmen
  • info@pliedes.com
  • +436641849759
Pliedes Automation e.U.

Buchholz 3, 

6719 Bludesch / Austria

Copyright © 2025 Pliedes Automation e.U.    ​ ​ ​ ​
English (UK) | Deutsch
Unterstützt durch Odoo - Die #1 Open-Source-E-Commerce

Wir verwenden Cookies auf dieser Website, um Ihnen ein besseres Nutzererlebnis zu bieten. Cookie-Richtlinien

Nur essentielle Ich stimme zu